Ermenrich NG40 Gas Detector
Portable gas detector for detecting flammable gas leaks
Product ID | 84092 |
Brand | Ermenrich |
Warranty | 5 years |
EAN | 5905555015972 |
Package size (LxWxH) | 8x35x15 cm |
Shipping Weight | 0.755 kg |
The Ermenrich NG40 gas detector with a flexible probe is a gas detector that can quickly detect flammable gas leaks even in hard-to-reach areas. Reliable, with a highly sensitive sensor, it allows you to set up individual alarm setpoints. The tool is useful in a household with gas appliances, in an industrial workshop, and at a gas filling station. It will allow you to quickly identify the source of danger and take action to deal with a gas leak.
The device has a built-in LCD display that shows not only the current gas concentration but also the maximum and average (within the last minute) values. There is also a battery status indicator. There are three ways of alerting you when the setpoints are exceeded: light, sound, and vibration. The device is powered by a rechargeable battery, with a single charge lasting approximately 8 hours of continuous use.
The device is not only water- and dust-proof, but also explosion-proof. A charging cable and an AC adapter are included, all packaged in a robust aluminum case (Ermenrich NG40 Black version only).
Key features:
- Detects combustible gas concentrations from 1 to 10000ppm
- Highly sensitive sensor detects even very small gas leaks
- The flexible probe for taking measurements in hard-to-reach places
- Alarm setpoints can be set up
- Three alarm types: light, sound, and vibration
- Powered by a rechargeable battery, up to 8 hours of run time
The kit includes:
- Gas detector
- USB charging cable
- AC adapter
- Aluminum case (Ermenrich NG40 Black version only)
- Pouch (Ermenrich NG40 Violet version only)
- User manual and warranty card
Product ID | 84092 |
Brand | Ermenrich |
Warranty | 5 years |
EAN | 5905555015972 |
Package size (LxWxH) | 8x35x15 cm |
Shipping Weight | 0.755 kg |
Combustible gases to be detected | carbon monoxide, methane, ethane, propane, butane, ethylene, propylene, butene, acetylene, propyne, butyne, etc |
Measuring range | 0–10000ppm |
Response time | instant |
Alarm | light, sound, vibration |
Alarm setpoint | low: 500ppm, high: 2000ppm |
Display | LCD (built-in) |
Power supply | 2000mAh lithium-ion battery (charging via USB cable) |
Battery life, h | 8 |
Explosion-proof | Ex ib IIB T4 Gb |
Waterproof | IP65; full dust protection; protection from jets of water |
thanks for your query.
The factory mode is not available to customers.
If you want to reset the default settings, you can find this function directly in the menu and you do not need a password.
The password is only used during gas calibration.
Hope this helps!