Bresser MyTime ND DCF Thermo/Hygro Wall Clock 25cm, petrol

Hi Liam,


thanks for your query.

Below you will find an instruction of the time setting :

NOTE! After the clock receives the DCF time signal the time will be set according to the Central European Time (CET). Summer and winter time change (and reverse) is also set automatically.

Automatic time setting via DCF time signal
After inserting the battery the time will be set automatically via a DCF signal. This process may take a few minutes. During this process, the clock hands will turn several times with interruption until they will display the right time.

Initiate receiving the DCF time signal manually
NOTE! Use this function when e.g. automatic summer/winter time change does not work or the wall clock temporarily receives no time signal.

Press and hold the REC button for 3 seconds to start the manual search for the DCF signal.
The clock hands will move to their start position (noon) and a wall clock then try to receive the signal.
Wait approx. 2-5 minutes until the current time will be displayed.

There is also manual time setting:

NOTE! It is necessary to set the time manually in places where no radio signal is received.

Press and hold the M.SET button for approx. 3 seconds.
When the minutes hand starts moving you can set the time manually:
Press the M.SET button shortly to set the time in minutes steps.
Press and hold the M.SET button to set the time continuously.
Release the M.SET button to stop manual settings save the time automatically and exit manual time setting mode.

Hope this helps!